This lot is the lower right deck parts

Print all this in PLA

The release section should be minimum 2.4mm wall thickness and 40% density, or more as this part is driven hard.

Files are:
- Ball Reload Positioner, this is screwed to the reload section just in front of the plunger to position the ball so it launches well. You will need to adjust this to get it right.
- Launcher 6.6 degree shim.  This is used under the launcher plunger to set it at a 6.6 degree slope tot he front panel and result in t he reload plunger running parallel to the deck.  Print it solid in PLA
- Reload Ball Release parts.  All form the relaos release piece.  The Slide Coupling is printed standing and the PLA forms a bridge as it prints.  Trust the process here;) 